RC Cessna Micro
This weekend I have build a new toy - NATAKU Cessna R/C Electric Airplane. This is very affordable model that is quite easily to build. But, instructions are quite bad for a beginner. It confirms the fact that you can not expect to get a very good product for such price, but only a fool would expect that. The only thing that was really bellow expectations was the motor. One of the wires just broke into pieces. Fortunately, I was able to replace the most problematic part of the wire.
Specifications:
Length: 380mm
Wingspan: 475mm
Flying weight: 60-75g
Motor: ADH50 3700kv Brushless outrunner
ESC: 5A/2S
Prop: GWS 4025
Servos: 2x2.5g
Battery: 2S 100~200mah Lipo (Not included)
Required:
Your own TX & RX (I have used: FrSky D4FR 4CH 2.4Ghz Receiver)
Battery 100~200mah 2S Lipo (I have used: Zippy Flightmax 180 mAh)
If you decide to build the model, pay attention to battery connectors. Included ESC has Mini JST. Total weight, including the battery, is 64 g.
